Product description
In Store Only !
This product is not eligible for purchase online.
Araknis Networks® 210 Series Websmart Gigabit Switch with Partial PoE+ and Rear Ports
For installs that require PoE on a budget, opt for the Araknis Networks® 210-series switch. With it, you get a sizable power budget and full PoE capability on all ports, up to 30W. You can also take advantage of Websmart, which allows you to control PoE and IP settings via OvrC. When it comes to operation, this switch has it all, including plug and play capability, multiple mounting options, and a sleek, 1U design. See how the 24-port, 16-port, and 8-port models compare to the competition.
Mounting Notice - The 8-port model ships with center-aligned rack ears.
Firmware Update - This product has new firmware available. Please update your switch during installation. You can update when you claim the switch in your OvrC account.
Websmart
With Websmart, you receive the benefit of PoE with similar management capabilities of our flagship 310-series switches, making for the perfect balance of manageability and simplicity.
Dual SFP Uplinks
Use this switch’s SFP ports to provide RJ45 uplinks to other devices, and/or fiber uplinks to extend the network over long distances while getting a stronger signal. Featuring a dedicated fabric, they don’t share a backplane with any other ports on the switch, which means you get a full 1 Gbps and don’t have to sacrifice a dedicated PoE port to use them ( no combo ports here! ).
Improved GUI
A clear and concise GUI with simple VLAN and Link Aggregation setup makes install work a breeze. And because the GUI is consistent with our routers and WAPs, you can avoid the learning curve altogether.
Control4 Driver for More Customization
Experience greater control and customization with the ability to reboot or power on/off the PoE ports or schedule power cycling for PoE-connected devices. With Control4 “Custom Experience” buttons, your clients control the ability to turn off Wi-Fi and power down IP cameras from the Control4 touch screen or mobile app. To access the driver, search for “Araknis” or “MS” in Composer.
Rift LED & Mechanical Design
Both stylish and informative, these blue LED lights indicate power status, port speed (10/100 Mbps - 1 Gbps), and link status. Plus, a redesigned faceplate is constructed with industrial materials, beveled edges, and a glossy finish, making for a clean design you’ll love to show off. You also get LED indicators on rear RJ45 ports, so you can easily monitor each port status.
Multi-Mounting
Mounting has never been easier. Due to its 1U design and available accessories, it can easily be mounted in a rack, wall, or anywhere in between. Included rack ears make for a sleek, left-justified design, while optional center-mount rack ears offer a more traditional look. To order center-justified rack ears, visit the corresponding product page.
Plug-n-Play
Stop spending time on network configuration. Simply plug this switch in, and you’re ready to go. It’s as easy as that.
Partial PoE
When you have a job that needs partial PoE, this switch has you covered. All ports have full PoE capability up to 30W, with a more economical power budget, giving you an efficient switch at a modest price.
1Gbps Throughput
With a powerful 1Gbps on all ports simultaneously, this switch can support the backbone of an install or simply act as a desktop add.
Fanless Design
The 8-port switch is fanless which allows for a completely silent solution. A smarter design features a honeycomb venting solution and temperature sensor that drives the speed of the fans, allowing for efficient and discreet temperature control.
2-Year Limited Warranty
Araknis Networks® products have a 2-Year Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified, or disassembled. Products to be repaired under this warranty must be returned to Snap One or a designated service center with prior notification and an assigned return authorization number ( RA ).
Specifications
Model: AN-210-SW-R-24 POE
Rack Spacing: 1U
RJ-45 1000BASE-T Ports: 24
SFP Uplink 1000BASE-X Ports: 2
RJ45 Auto Negotiation: Yes
RJ45 Auto Sensing: Yes
Auto MDI/MDI-X: Yes
POE Ports: 24
Flash Memory: 16MB
SDRAM Memory: 128MB
Packet Buffer: 512KB
MAC Table Size: 8K
Switching Capacity: 52 Gbps
Forwarding Rate: 38.7Mpps
PoE Features:
- 802.3af/at
- Auto PD Classification
- Max Power Output per Port: 30W
- Max Simultaneous Power per Port: 8W
PoE Power Budget: 190W
Power Features:
- Enable/Disable per port
- Priority Setting per port
- Overloading Protection per port
- PoE/1Gbps LED Toggle Setting
- PoE Power Withdraw Reading per Port
- Power level setting per port
L2 Features:
- Head-of-line blocking ( HOL )
- Energy Efficient Ethernet ( IEEE 802.3az )
Flow Control: 802.3x,Back pressure
Forwarding Mode: Store-and-forward
Spanning Tree:
- 802.1D ( STP )
- 802.1w ( RSTP )
- 802.1s ( MSTP )
VLAN Features:
- 802.1Q
- VLAN Group
- Port-based VLANs
- QinQ
- Protocol-based VLANs
- Voice VLAN
Link Aggregation Features:
- Static, 802.3ad LACP
- Max Ports per group: 8
- Max group: 8
Multicast Features:
- IGMP Snooping v1/v2/v3; MLD Snooping v1/v2
- IGMP Querier
- IGMP Immediate Leave
Storm Control: Broadcast / Unknown Multi-cast / Unknown Unicast
Jumbo Frame Support: 9k
QoS Features:
Priority Queues: 8 queues per port
Rate Limiting - Ingress: 1 Kbps/1 pps
Rate Limiting - Egress: 1 Kbps/1 pps
Scheduling: WRR, Strict Priority
CoS: 802.1p, IP ToS Precendence, IP
Security Features:
- Port Security ( MAC-based )
- 802.1x-PNAC ( Port-based )
- IP Source Guard
- RADIUS
- HTTPS and SSL
- SSH v2.0
- MAC Filter
Management Protocols: CLI, Web, Telnet, Cloud-based Managed via OvrC
Management Access Filtering: Management Access Filtering
SNMP: v1,2c,v3
DHCP: Client
Event Log:
- Local flash
- Remote server
Management Features:
- FW Upgrade: TFTP, HTTP
- Port Mirroring: One to One, Many to One
- sFlow
- SNTP
- Remote Ping
- LLDP ( IEEE802.1ab )
- Cable Diagnostics
- UPnP Client
- RMON ( 1,2,3 and 9 groups )
- Dual FW Image
Dimensions: 17.32" ( W ) x 1.73" ( H ) x 10.23" ( D )
Weight: 7.7 lbs
Line Voltage: 100-240V AC, 50/60 Hz
Power Consumption:
Max: 235.65W
Device: 27.13W
BTU/h ( max ): 24.26
Operating Temperature: 32°F-122°F
Operating Humidity: 10-90%
Fan Noise:
30.7 dBA ( < 24°C @ 25% )
36 dBA ( 25-29°C @ 50% )
41.2 dBA ( 30-34°C @ 75% )
45 dBA ( ≥ 35°C @ 100% )