Subscribe for exclusive deals.
We do not share or sell your information.
Features
- Multi-patented DriveCore Amplifier Technology
- 8 channels each with 125 Watts into 8-ohms, All Channels Driven
- High-efficiency, Quiet Convection-cooled Design
- Local / Bus RCA Input Selection and Independent Channel Output Level Controls
- 12 Volt Trigger Input / Output and Signal-sensing Channel Inputs
- Short-circuit and Thermal Protection Circuitry
Lexicon DD-8 Network Amplifier User's Manual
Specifications
Frequency Response |
20 Hz - 20k Hz +0 / -1.5dB |
Input Impedance |
100K ohms typical |
Input Sensitivity |
1.12 volts for 125 Watts out into 8 ohms |
Height |
2.1" with feet / 1.7" without feet ( 1 rack space ) |
Width |
17.3" |
Depth |
14.9" |
Weight |
9.2 lbs |
Communication & Control |
12 Volt DC Trigger In / Out ( 3.5 mm and Phoenix ) |
Inputs |
Bus and Local L / R RCA jacks |
Rated Output Power Into 8 Ohms |
125 Watts RMS per Channel from 20 Hz - 20k Hz, All Channels Driven |
Signal-to-Noise Ratio |
< -105 dB Below Rated Full Power A-weighted |
Total Harmonic Distortion |
Less than 0.05% at Full Rated Power 20 Hz - 20k Hz |
Gain |
29 dB |
Power Requirements |
100 - 240 Volts AC 50 / 60 Hz |
Speaker Connections |
4-pin Phoenix-type Connectors |
Included Accessories |
Rack Ears and Mounting Hardware |