The IA 800-2C is part of our Connect Amplifiers division, bringing our Connect IP interface, a web application which can be accessed by any device connected to the internet with a web browser on the same network.

Fluently delivering up to 800 watts per channel, this two-channel powerhouse can directly drive 70 Volt line speakers without a line matching transformer. Each channel has a volume adjustment on the front panel and the 2U high case universally fit into most racks whilst delivering 93% energy efficiency. And even though it's likely to live its live on the rack, our design team have produced an especially handsome Installation Amplifier. Ready and waiting for any project.

Monitor Audio IA800 User's Manual

Specifications

'Connect' IP Control: Yes

Channel Number: 2 (1 Stereo Pair)

Power (watt / channel) | 4 ohms: 800 watt

Power (watt /channel) | 8 ohms: 500 watt

Power (watt /channel) | Bridge ( 8 ohms ): 2000 watt ( 1 channel )

Power (watt / channel) | 70 Volt: 800 watt

Input Impedance: 20k ohms

Output Impedance ( Loop RCA ): 600 ohms

Input Sensitivity: 100 mV / 1 Watt, 2200 mV – Full power

Maximum Input Voltage: 2.9 Volt

Signal to Noise Ratio: -100 dB ( 20 Hz – 20k Hz )

Frequency Response: 5 Hz – 50k Hz

Total Harmonic Distortion THD + N @ 1k Hz: 0.03%

Rack Height: 2U

Dimensions Including Feet ( H x W x D ): 3 ^13/16"  x 17 ^1/4" x 16 ^13/16"

Width  ( including rack brackets ): 19"

IP Communication: TCP / IP ( RJ-45 10 / 100 Base T )

Mains Operating Voltage: 100 –120 Volt @ 60 Hz; 220 – 240 Volt @ 50 Hz

Fuse Rating: 100 - 120 VAC: T15AL / 250 VAC; 220 - 240 VAC: T10AL / 250 VAC

Standby Power Consumption: <0.5 Watts ( green mode )

Networked Standby Power Consumption: <2 Watt

Weight: 20 lbs 4 oz