Product description
Enjoy your vinyl 33 1/3 and 45 rpm records with your compatible stereo system and the high gloss white THORENS TD201 Two-Speed Stereo Turntable It features an 8.8" straight aluminum tonearm and a 12" diameter die-cast aluminum platter. Its gold-plated RCA output allows you to connect it to nearly any audio system thanks to the built-in switchable phono preamp.
Features
- Plug-and-play design
- Detachable headhsell with preconfigured AT3600 cartridge
- Aluminum platter with rubber mat
- Integrated switchable pre-amp
Specifications
Turntable
| Speeds: | 33 1/3, 45 rpm |
| Speed Deviation: | ±2% |
| Drive Method: | Belt Drive |
| Motor: | DC Motor |
| Wow and Flutter: | 0.2% |
| Signal to Noise Ratio: | A-Weighted, 20 kHz, LPF: ≥67 dB Unweighted, 20 kHz, LPF: ≥60 dB |
| Platter Diameter: | 12" / 300 mm (Approximate) |
| Turntable Platter: | Material: Die-Cast Aluminum |
| Output: | 1 x Gold-Plated Stereo RCA Pair with Ground Screw |
Tonearm
| Tonearm Type: | THORENS TP 71 |
| Design: | Static Balance, Straight |
| Material: | Aluminum |
| Effective Arm Length: | 8.8" / 223.6 mm |
| Overhang: | 0.73" / 18.6 mm |
| Cartridge Weight: | Supported: 3.5 to 6 g |
| Stylus: | Pressure Range: 0 to 4 g |
| Anti-Skating Adjustment: | Supported |
Cartridge
| Cartridge Type: | MM Type (Audio-Technica AT3600) |
| Frequency Range: | 20 Hz to 20 kHz |
| Output Voltage: | 2.5 mV (1 kHz, 3.54 cm/sec) |
| Stylus Type: | Bonded Diamond |
| Channel Separation: | >18 dB |
| Channel Balance: | 2.5 dB |
| Vertical Tracking Angle: | 20° |
| Impedance: | Load Supported: 47 Kilohms |
| Stylus: | Pressure: 3.5 g ±0.5 g |
| Weight: | Cartridge: 5 g ±0.5 g Headshell: 10 g (Including Screws, Nuts, and Wires) |
Reviews
Related Products
Thorens TD 102 A Fully Automatic Turntable with MM Phono Preamplifier
$1,099.00
Thorens TD 402 DD Turntable
$1,299.00
Thorens TD 124 DD
$11,999.00
Recent Products
TD 201 Manual Turntable
$699.00
