Free Shipping to Continental US only !

CDi 2000 Two Channel 800W @ 8 Ohm 70V/100V/140 Volt Power Amplifier

CDi 2000 Two Channel 800W @ 8 Ohm 70V/100V/140 Volt Power Amplifier

$1,441.65
          (0 reviews)
Out of stock
+
  Add to Wishlist
This a rugged amplifier designed for installed audio applications. The CDi2000 provides accurate, uncolored sound with low distortion for excellent music reproduction. It handles a wide range of speaker impedances & outputs, making it very versatile.

The CDi 2000 from Crown Audio is a rugged, lightweight amplifier designed for installed audio applications. CDi stands for "Contractor Digital Intelligence". The CDi 2000 provides accurate, uncolored sound with low distortion for excellent music and vocal reproduction. It also handles a wide range of speaker impedances and outputs, making it very versatile.

Advanced protection circuitry guards against shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults. The CDi 2000 also has integrated DSP presets for crossover frequencies, EQ, limiting, compression, delay, and a subharmonic synthesizer. A backlit LCD displays relevant information.

Features

- Rugged and lightweight steel construction

- Operates in dual or bridge-mono modes

- Rack mountable

- Excellent sound reproduction with low distortion

- Advanced protection circuitry protects against overheating, overloads, and shorts

- Switch-mode universal power supply

- Wide range of speaker impedances and outputs

- Backlit LCD

- Integrated DSP

Crown Audio CDi 2000 User's Manual

Specifications

Frequency Response

20Hz - 20kHz ( @ 1W into 4 Ohms )

Sensitivity

1.4V @ 8 Ohms

Signal to Noise Ratio

100dB

Voltage Gain

30.5dB ( @ 1kHz, 8 Ohm Rate Output )

Load Impedance

Rated for 2-8 Ohms in Stereo Mode
Rated for 4-16 Ohms in Bridge-Mono Mode

Input Impedance

20 kOhms ( Nominal )

Output Power

1000 Watts @ 2 Ohm Dual ( Per Channel )
800 Watts @ 4 Ohm Dual ( Per Channel )
475 Watts @ 8 Ohm Dual ( Per Channel )
2000 Watts @ 4 Ohm Bridge-Mono
800 Watts @ 70V Dual ( Per Channel )
1600 Watts @ 140V Bridge-Mono

Damping Factor

Better than 500 from 20Hz to 400Hz

Crosstalk

> 70dB Below Rated Power, 20Hz to 1kHz

Max Input Signal

+ 22dBu Typical

Inputs

2 x 3-Pin Removable Phoenix-Type

Outputs

4-Position Barrier Strip with Connectors for Dual Loudspeakers or Bridge-Mono Loudspeaker

Power

100V, 120V-240V, 50/60 Hz

Dimensions 

( W ) 19 x ( H ) 3.5 x ( D ) 12.25"

Weight

19 lbs

Packaging Info

Package Weight

22.85 lb

Box Dimensions ( L x W x H )

22.8 x 19.0 x 6.7"

Contact us to inquire how you can finance your purchase through our partner, Synchrony.