Greater Dynamic Range: BIT products provide very low source impedance to connected devices. A low impedance power source supplies ultra high current on demand, ensuring components (even power amps!) are not starved for power. For example, a 200 watt amplifier demands 10A RMS current from a 120V line but may demand up to 50A instantaneous peaks. A 15A or 20A BIT can deliver 300A or 400A peaks when the system demands it, allowing the highest power amplifiers to deliver maximum performance and dynamics without strain or compromise. The High Instantaneous Current Capability provides the expanded dynamic range experienced when using Torus Power.
Active Surge Suppression: BIT uses series mode surge suppression (SMSS) technology to fully protect your equipment from damaging lightning strikes and power surges. Our unique Series Mode Surge Suppression does not shunt the voltage spike to ground like MOV’s do, and therefore the ground remains stable and uncontaminated. BIT surge suppression has clamping voltage onset that absorbs voltage surges more than 2V above peak nominal line voltage. BIT units are built to surpass IEEE endurance standards that require products to withstand lighting strikes of 6000 volts, 3000 amps with 1000 repeats.
Isolation From the Grid: BIT provides total isolation from the outside power grid through a Plitron-designed and -built toroidal isolation transformer that eliminates electrical noise caused by sources such as motors, lights, appliances and dimmers commonly found in the home environment. Therefore, providing power to your system via a BIT isolation transformer is infinitely superior to using wall power that is increasingly polluted and noisy.
Ultra Quiet: Bryston BIT products utilize Plitron’s ‘LONO’ (Low Noise) transformer design technology, which eliminates audible noise in the power transformer regardless of line conditions, DC offset and over-voltage. Torus Power products perform at the NC10 level measured on the standard NC (Noise Criterion) rating, making them ideal for use in even the most demanding environments such as professional recording and broadcast studios, as well as in home theater and large-scale audio/video systems.
Pure Power: BIT products utilize Plitron “NBT” (Narrow Bandwidth Technology) to attenuate differential and common-mode noise without using external circuits or components. NBT technology starts at a lower corner frequency (2 kHz) than other systems, and the result is startling. Dramatic improvements are immediately noticeable in audio and video systems.
BIT AVR2 Models also include:
Automatic Voltage Regulation: Our AVR technology provides stable voltage to connected equipment, regardless of fluctuations in the incoming line voltage. Voltage fluctuations cause stress to electronic components and sensitive microprocessors within the components which often will cause premature failure. With the degradation of the power grids worldwide, automatic voltage regulation provides the extra assurances of peak performance and longevity for valued audio and video equipment. Why? It’s really quite simple. Equipment operating at the optimal voltage will perform better and last longer.
Control: BIT IP addressable models meet the needs of the custom installation industry with cloud control or IP based monitoring and control. All AVR2 models feature a built in web browser interface accessible on the local area network, via VPN, or through ihiji remote network management. Other useful features include password control, automatic e-mail notification of fault conditions, and delayed switch-on (5 seconds) when power is turned on, or restored. All AVR2 models also include RS232 control and are compatible with Control4, Crestron, Savant and other home automation systems.
You simply cannot have distortion free audio playback without clean power. Sure, our analog equipment has exceptionally good power supplies which filter incoming AC effectively, but the performance improvement gained from providing your whole system with unimpeded clean power is remarkable.
Choose the BIT15 if you have small amplifiers (100W or less) or simply want to give your source components and preamplifier the cleanest power possible. The BIT20 adds extra power output handling and mechanical isolation of the transformer for even further reduced in-room noise.
- Superb transformer-based isolation from AC mains noise does not restrict current flow.
- Narrow Bandwidth Technology allows only a narrow AC bandwidth through effectively cutting high frequency noise components before they reach your equipment.
- Series Mode Surge Suppression is active and clamps power surges at only 2 volts above nominal making it far more effective than sacrificial MOV based devices.
- Medical grade power outlets on North America models.
- 17 or 19" wide dress panels. 19" wide are rack mountable.
- 17" are available in black or silver.
|Dimensions (in.):||17 or 19 X 16.5 X 4||17 or 19 X 16.5 X 6.3|
|Frequency:||60 Hz||60 Hz|
|AC Inlet Type:||IEC 15A||IEC 20A|
|No. Outputs:||10 ea.||10 ea.|