Subscribe for exclusive deals.
We do not share or sell your information.
Ultra HD IP Gigabit POE Transmitter, 3G 707POE TX
Ultra HD IP Gigabit POE Transmitter, 3G 707POE TX
$699.00
This 3G Ultra HD Transmitter supports all lossless audio formats, including Dolby Atmos as part of the UltraHD over IP line of products. Distribute 4K video & audio over a single Cat5e or Cat6 cable to every zone with this Transmitter.
4K over IP Fiber Not Required
The Just Add Power 3G High Fidelity Transmitter supports all lossless audio formats – including Dolby Atmos® – as part of the UltraHD over IP line of products.
Distribute 4K video and lossless audio over a single Cat5e or Cat6 cable to every zone with the 3G High Fidelity Transmitter.
Mix-and-match with the 3G+AVP Transmitter to distribute any audio format to any zone.
Build a future-proof 4K infrastructure. Just Add Power UltraHD over IP integrates seamlessly with 1080p infrastructure – keep the switch, cabling, and driver! Add 4K to current 1080p systems, or build a new 4K system.
Introduction
The Just Add Power 3G HD over IP System has multiple models of Transmitter - source-side encoding device - meant for different requirements at the source location. All models are compatible with each other so they can be used in the same installation. Use this article to help with choosing the model that best serves the video, audio, and hardware needs of each source location.
Units labeled as 2GΩ/3G are part of the 3G HD over IP System, but have a maximum supported resolution of 1080p. This distinction allows 1080p installations to take full advantage of all features of the 3G System without the additional cost of 4K compatibility when it is not needed. If you are planning a new 1080p project, see the 1080p Transmitter Comparison article instead.
Features of All Models
|
Feature |
Description |
|
4K Video |
4K resolution support |
|
Instant-Seamless Switching |
Switch from one source to another without the display realizing the source changed. |
|
Image Pull |
Snapshot an image of video for display on any network-accessible device. |
|
Endpoint control |
Control sources and displays with IR, RS232, and CEC. |
Baseline Model
VBS-HDIP-707POE
3G POE Transmitter
Ports
HDMI In
Gigabit network with POE
RS232
Power
All audio formats supported. Audio is passed-through to the display endpoint with no modification.
Other Models
The baseline model - 707POE - is powered by POE and has 4K video, pass-through any audio, instant-seamless switching, RS232 / IR / CEC control, and image pull. The models below should be specified if additional features not present on the 707POE are needed
| Model | Variation from Baseline Model | Example |
|---|---|---|
| 708POE | Adds: 1) Stereo Out port |
Feed a stereo audio source HDMI into the Transmitter, then break Stereo Out to a separate analog audio distribution matrix |
| 717HIFI | Adds: 1) HDMI loopout |
Feed HDMI to a local display where the unit is mounted |
| 718AVP | Adds: 1) Dolby Digital 5.1 audio downmix to Stereo 2) Stereo Out port 3) USB port 4) Mic- and line-in ports Removes: 1) Audio support for formats other than Dolby Digital 5.1 |
Connect to a Dolby Digital 5.1 source - cable / satellite, streaming - and distribute to surround-sound zones and stereo zones simultaneously. |
| 709P2P | Adds: 1) 40W POE Injector built-in. Not POE. Power supply powers the 709P2P and additional units via POE |
Transmitter for a point-to-point or point-to-multipoint system that can power up to 4 Receivers via POE. |
| 767DSS | Adds: 1) Dante Sound System compabitility - LPCM audio 2) HDMI loopout Removes: 1) Audio support for formats other than LPCM 2) RS232 port |
Mix video distribution with Dante Sound System 1) Inject HDMI source into Dante audio system 2) Play Dante audio source through video distribution system |
| 716VGA | Adds: 1) VGA In port 2) Line In port 3) USB port 4) 1080p max Removes: 1) HDMI In port 2) 4K capability |
Add a VGA source to the HDMI distribution system |
| 725POE | Gains: 1) SDI In port 2) HDMI loopout 3) Stereo Out port 4) 1080p max Removes: 1) HDMI In port 2) 4K capability |
Add an SDI source to the HDMI distribution system |
| 726TVI | Gains: 1) TVI In port 2) HDMI loopout 3) USB port 4) 1080p max Removes: 1) HDMI In port 2) 4K capability |
Add a TVI source to the HDMI distribution system |
*IR control requires use of VBS-HDMI-IRD IR Dongle.
Wallplate & Rackmount Versions
Form factor variations on the models above to fit nicely in a wallplate or a rack
| Model | Form Factor | Comparable Unit | Information |
|---|---|---|---|
| 747POE | Rackmount | 707POE | 4 x 707POE in a rack in 1RU Each board is POE-powered |
| 749AVP | Rackmount | 718AVP | 3 x 718AVP in 1 RU |
| 707WP2 | Wallplate | 707POE | 2-gang Slim fit for mounting in table, wall, podium for HDMI BYOD situations |
| 717WP2 | Wallplate | 707POE & 716VGA | 2-gang HDMI In, VGA In, USB, Input toggle switch Mount in table, wall, podium for VGA or HDMI BYOD situations |
| 718WP4 | Wallplate | 718AVP | Mount in table, wall, podium for VGA or HDMI BYOD situations that potentially need control and diagnostics |
Contact us to inquire how you can finance your purchase through our partner, 
.
Reviews
0 stars based on 0 reviews
