Digital Subwoofer Amplifier

Digital Subwoofer Amplifier

          (0 reviews)
Out of stock
+
  Add to Wishlist
In Store Only! These digital subwoofer amplifiers with dual sub outputs runs steady and are fine-tuned with custom EQ settings to be used with our dual 8" in-wall, 10” hardscape, or 12” burial subs.

In Store Only !

* This product is not eligible for purchase online ! *

Episode Digital Subwoofer Amplifier with 500 watts and Front Panel Display

( EA-AMP-SUB-1D-500R )

This digital subwoofer amplifier with front panel display and dual sub outputs runs steady at 500 watts at 4 ohm, and is fine-tuned with custom EQ settings to be used with our dual 8" in-wall, 10” hardscape, or 12” burial subs.

Front Panel Display

This amp’s front panel screen displays the volume level and other control settings. Access the menu function screen using the selection knob to adjust volume, crossover, phase, and EQ settings. It also allows you to select sound mode, night mode, and power mode settings, and can assign an IR device ID for control system integration. Plus, there is a lock control setting that prevents accidental changes in settings.

Custom EQ Settings

This Episode® amplifier offers flexibility to enable or disable EQ settings. There are 3 custom EQ settings optimized for our subwoofers.

Power Mode Selection

Intelligent power management allows the amp to turn on automatically, either when an audio signal is detected or by using a 12V trigger from your AV receiver or processor. An illuminated front-mounted push button also allows you to turn the amplifier on or off when set to the always-on mode.

Connections

RCA line level inputs and pass-through outputs allow you to connect additional amplifiers, while the 12V trigger input and output allows you to connect another 12V trigger device; the amp also has dual sub outputs in parallel configuration.

Rack-mount Installation Option

Rack ears with three fastening points help eliminate sag when the amp is installed into a rack, while top cover and side panel ventilation slots allow better airflow.

Control System Integration

Features an IR port to connect an IR device. Simply connect an IR repeater or IR controls system to the IR port on the back of the amplifier, and set the device ID in the front panel controls menu.

Subsonic Circuits

A limiter circuit has been incorporated into the amp to protect the connected subwoofer from harsh or damaging distortion that could not only ruin the listening experience, but the woofer

2-Year Limited Warranty

This Episode® Amplifier product has a 2-Year Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number ( RA ).

Episode® Digital Subwoofer Amplifier - 300 watts 

The Episode EA-AMP-SUB-1D-300 Digital Subwoofer Amplifier delivers 300 watts of clean power at 4 ohms, making it the perfect companion for our in-wall subs. This single-channel amplifier features convenient EQ modes, and variable power-on options, all wrapped in a 1U chassis.

Handy connections

RCA line level connections allow you to connect additional amplifiers, while the 12V trigger allows you to connect another 12V trigger device; the amps also have dual sub outputs in parallel configuration.

Add Bass to Every Room

Deliver incredible audio throughout the home by pairing this sub amp with Episode’s new Dynamic amplifiers - with dedicated subwoofer outputs per zone.

Rack Mount Option

Whatever your installation requires, you will be prepared. At only 1U tall (1.75”), these amplifiers come with removable rubber feet and rack ears for direct rack mounting.

Multiple power-on options

Want the amplifiers always on? Don't want them on until they sense a signal? No wait, you want them to be controlled via a 12-volt trigger, right? The beautiful part is all three options are available to complement the ease of installation.

Optimized Controls

A rear-mounted rotary dial for crossover, phase, and volume control enables you to optimize any system for ultimate performance.

Custom EQ Settings

EQ modes are provided for fast and simple selection of music or movies.

Cool Performers

At the heart of these units is a highly-efficient digital power supply. This cool-running technology produces clean, tight bass.

Subsonic Filter

A limiter circuit has been included at the input stage to protect the connected woofer(s) from harsh, damaging distortion that can not only ruin the listening experience, but the woofers themselves.

2-Year Limited Warranty

This Episode® Amplifier product has a 2-Year Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to SnapAV or a designated service center with prior notification and an assigned return authorization number ( RA ).