Shunyata Research’s new Reference Line power cords were developed using the same materials science and technologies that make the Omega the market’s ultimate cost-no-object power cord. The Reference Line power cables are designed to be used with the worlds finest audio components.
There are three levels of performance in the Reference Line starting with the Delta v2 and models. The Alpha v2 is a level up from the Delta v2 and represents the best price-to-performance in the lineup. The Sigma v2 takes top honors in the line for those that must have the best. All three Reference models feature Shunyata Research’s exclusive VTX-Ag conductors that combine an ultra pure silver with a concentrically wound layer of OFE copper. This provides the speed and transparency of silver with the richness, tonal color and power of pure copper.
Reference XC cables are designed specifically to optimize the performance of Shunyata Research power conditioners. The Sigma v2 XC cables eschew noise reduction features in favor of enhanced DTCD ( dynamic transient current delivery ). Using proprietary conductors and parts developed for the Omega XC, the Sigma v2 XC delivers pace-setting DTCD™ instantaneous current delivery, optimizing power conditioner and high-current amplifier performance.
The Sigma v2 XC is an ideal power cable for your Shunyata Research power conditioner while the Sigma v2 NR provides noise reduction to the source components. The Sigma v2 NR provides great performance for all of the source equipment like CD players, DACs, tuners and preamplifiers.
Recommended Power Conditioners: Hydra Sigma S12, Denali 6000/S v2, Everest 8000
Dynamic Transient Current Delivery
DTCD™ Analysis is a technique that measures instantaneous current through low impedance electrical conductors and contacts. Shunyata Research uses it to optimize the design, specification and construction of parts and materials to ensure maximum current delivery performance. Each part, conductor, noise circuit and material allows for maximum throughput of instantaneous current.
Listeners will experience earth-shaking low-frequency performance from even the highest-current amplifiers as well as dynamic contrasts unheard of outside of a live event. More than any other design parameter, Shunyata Research’s skill in eliminating resistance and maximizing peak-current delivery is unmatched.
CopperCONN’s™ internal metals are culled from solid copper and use a high-tension spring-loaded contacts for vice-like grip. This contributes to a measurable improvement in DTCD™ performance and a correspondingly obvious difference in audible performance.
CopperCONN™ connectors deliver measurably lower-resistance connections that will unlock the performance of any component and system.
Shunyata Research’s ArNi® conductors are designed to be the finest quality wire available for power and audio purposes. They start life using the highest purity copper available – OFE C10100 ( or Ohno single crystal ). Then they are formed into “virtual hollow tubes” that we call VTX™. The core of the conductor is completely hollow forcing the current to only travel through the periphery of the conductor, therby eliminating skin effects and random eddy currents.
And finally, every ArNi® wire undergoes our proprietary KPIP™ process.
OFE Alloy 101
Shunyata Research uses only the highest purity of copper available for the production of its wire products. OFE Alloy 101 or C10100 is the highest grade of copper with a minimum 99.99% purity and a conductivity rating of 101% IACS. OFE stands for oxygen-free electrolytic and supersedes the term OFHC ( oxygen-free high conductivity ). C10100 is the only grade of copper that comes with a written certification of purity.
Certified by ASTM F68 C10100
Fluorocarbon dielectrics are usually only found in wire used in the aerospace industry, satellites and only the most expensive audiophile cabling. It has special electrical characteristics; very low dielectric absorption, high dielectric strength and exceptional heat resistance. When used in audio and power cables is reduces the perception of dynamic compression and it improves sonic low-level resolution and clarity.
Crystal clear transient detail.
Simple crimping, soldering, brazing and screws are all inferior methods of joining two wires or terminals together. Sonic welding uses high-energy sonic waves to literally join two metals together at a molecular level and cold-welding uses high-energy pneumatic pressure to bond metals. Shunyata Research uses both methods to secure connections that do not degrade over time.
Shunyata Research’s proprietary Kinetic Phase Inversion Process includes four days of continuous KPIP™ processing to dramatically reduce burn-in time and significantly improve sonic performance, delivering a relaxed and life-like presentation.
Cable Type: VTX-Ag 06
Conductors: ArNi® / OFE
Connectors: CopperCONN™ Carbon-Fiber
Noise Reduction: NA
HARP Module: NA
KPIP Processing: 4-days
Standard Length: 1.75 meters
Safety Assurance: Continuity and polarity tests – by two technicians, HiPOT tests insulation breakdown @ 4,500 VAC
Over more than 2 decades, the reliability and durability of Shunyata Research products has become a legendary attribute of the brand. Shunyata products are completely non-reactive and run cool to the touch. They do not hum, vibrate, buzz, or generate heat and do not require any ventilation. Despite heavy-use applications in studios, medical labs, and home environments, Shunyata Research products maintain an almost zero failure rate.
In an era of products that are mass-produced, Shunyata Research invests in training career craftsman who build our products by hand at our factory in Poulsbo, Washington. The exceptional fit, finish, and attention to detail has become a hallmark trait of Shunyata Research products going back to its inception in 1998. Shunyata Research has been building some of the finest power and cable products in the industry for more than twenty years. The commitment to building durable products that are designed to last a lifetime elevates our products to the top of their class.
Safety and quality control is job one at Shunyata Research. Before anything leaves the factory, we test each and every product thoroughly and carefully for safety and quality. This explains the long-term success of Shunyata Research products in the professional recording, medical, scientific, and consumer industries. Shunyata Research’s impeccable product safety and reliability track record for the past 23 years speaks for itself.
NO HUM — NO BUZZ — NO HEAT
The unparalleled craftsmanship and build quality of Shunyata Research products is backed by a limited lifetime warranty. This demonstrates our commitment to building the finest products on the planet and providing exceptional customer support.
Valid only in the US and Canada!
Shunyata Research Everest 8000T Reference Power Distributor
Shunyata Research Hydra Alpha A12 Power Distributor
Shunyata Research Denali 6000/S v2
Shunyata Research Sigma V2 Speaker Cable with Spade Termination
Shunyata Research Sigma XLR Cable
Shunyata Research Sigma AES/EBU Digital Cable
Shunyata Research Sigma RCA Cable
Shunyata Research Sigma v2 Phono Cable
Shunyata Research Sigma Ethernet Cable
Sigma v2 XC Power Cable