Focal Series Professional Shape 40 Studio Monitors Dark Walnut ( Each )

Product description

The Focal Shape 40 Speakers can be used from 23" away ( 60cm ). They have astonishingly extended low-end frequency response. Shape 40 is the perfect solution for rooms less than 107ft2 ( 10m2 ) and compact spaces.

Each Shape 40 monitor speaker is made in France and use five innovations to maximize acoustic transparency. These were designed to meet the needs of near-field monitoring. Shape monitors combine an ingenuous design and numerous settings optimized for the acoustics of small listening rooms.

The innovations provide remarkable acoustic transparency. These new work tools distinguish themselves through the wide and extremely precise stereo image.

The bass register is articulated and controlled. The lower mid-range and mid-range benefit from extreme neutrality, and without any masking effects, making equalization of these essential registers much easier.

The new tweeter is what's at the source of the very high definition. It efficiently reveals any hissing, and it's also very precise in the very high end.

Flax Sandwich Cone

Recent technology has proven to be a considerable improvement, in terms of weight, rigidity and damping.

TMD Surround

This technology provides a linear frequency response curve between 1 and 2kHz, while significantly reducing distortion in the same range. The mid-range register benefits from remarkable neutrality, and it contributes to the great precision of the overall stereo image.

Features

- Tweeter with very low directivity for a flexible listening position

- Designed without a port, but with a double passive radiator, allowing it to be placed near a wall

- Numerous settings for optimal integration

- Accurate control, even in the very high end

- Flax sandwich cone: controlled and articulated bass, natural and detailed lower mid-range and upper mid-range registers

- Mounting mechanisms present on the back and underneath the loudspeaker: for installing on a table stand, a microphone standm the ceiling or a wall ( mounting accessories not supplied )

Specifications

Frequency Response (+/-3dB): 60Hz - 35kHz

Maximum SPL (musical signal):102dB SPL ( peak @ 1m )

Inputs/Impedance

XLR: balanced 10kOhms
RCA: unbalanced 10kOhms with sensitivity compensation

Midrange & Low Frequency Amplifier: 25W, class AB

High Frequency Amplifier: 25W, class AB

Standby On: After approximately 30 minutes with no signal

Standby Off: Signal detection > 3 mV

Voltages: 200-240V ( T500mAL / 250V fuse ) or 100-120V ( T1.6AL / 250V fuse )

Connection IEC plug and detachable power cord

High Pass Filter: Adjustable Full range / 80Hz

Bass (0 - 250Hz): Adjustable, +/-6dB

Midrange/Bass (160Hz, Q=1): Adjustable, +/-3dB

High (4.5 - 35kKz): Adjustable, +/-3dB

Power On / Power Off: On/off switch on rear panel

Standby Consumption: < 0.5W

Displays & Controls: LED for power on/off and standby

Woofer

4" ( 10cm )
Flax Cone

Tweeter: 1" ( 25mm ) 'M' profile Aluminum-Magnesium

Cabinet Construction: 0.5" ( 12mm ) MDF

Finish:Vinyl, real walnut and black painting

Dimensions with four rubber feed (HxWxD)

10.1 x 6.3 x 7.9"
Weight: 16.1lbs