The Reference of The Line
The Shape 65 is the reference of the Shape line. Although it's dedicated to nearfield monitoring, this monitor enables extraordinary monitoring quality, in the lowest to the highest frequencies.
Simply a must, this monitor will express its full potential from a listening distance of three feet away ( 1 meter ).
Each Shape 65 monitor speaker is made in France and use five innovations to maximize acoustic transparency. These were designed to meet the needs of near-field monitoring. Shape monitors combine an ingenuous design and numerous settings optimized for the acoustics of small listening rooms.
The innovations provide remarkable acoustic transparency. These new work tools distinguish themselves through the wide and extremely precise stereo image.
The bass register is articulated and controlled. The lower mid-range and mid-range benefit from extreme neutrality, and without any masking effects, making equalization of these essential registers much easier.
The new tweeter is what's at the source of the very high definition. It efficiently reveals any hissing, and it's also very precise in the very high end.
Flax Sandwich Cone
Recent technology has proven to be a considerable improvement, in terms of weight, rigidity and damping.
This technology provides a linear frequency response curve between 1 and 2kHz, while significantly reducing distortion in the same range. The mid-range register benefits from remarkable neutrality, and it contributes to the great precision of the overall stereo image.
- Tweeter with very low directivity for a flexible listening position
- Designed without a port, but with a double passive radiator, allowing it to be placed near a wall
- Numerous settings for optimal integration
- Accurate control, even in the very high end
- Flax sandwich cone: controlled and articulated bass, natural and detailed lower mid-range and upper mid-range registers
- Mounting mechanisms present on the back and underneath the loudspeaker: for installing on a table stand, a microphone stand, the ceiling or a wall ( mounting accessories not supplied )
Frequency Response (+/-3dB): 40Hz - 35kHz
Maximum SPL (musical signal): 109dB SPL ( peak @ 1m )
XLR: balanced 10kOhms
RCA: unbalanced 10kOhms with sensitivity compensation
Midrange & Low Frequency Amplifier: 80W, class AB
High Frequency Amplifier: 25W, class AB
Standby on: After approximately 30 minutes with no signal
Standby off: Signal detection > 3 mV
Voltages: 220-240V ( T1AL / 250V fuse ) or ( 100-120V (T1.6AL / 250V fuse )
Connection: IEC plug and detachable power cord
High Pass Filter: Adjustable Full range 45/60/90Hz
Bass (0 - 250Hz): Adjustable, +/-6dB
Midrange/bass (160Hz, Q=1): Adjustable, +/-3dB
High (4.5 - 35kKz): Adjustable, +/-3dB
Power On / Power Off: On/off switch on rear panel
Standby Consumption: < 0.5W
Displays & Controls: LED for power on/off and standby
6.5" ( 16.5cm )
Tweeter: 1" ( 25mm ) 'M' profile Aluminum-Magnesium
Construction: 0.6" ( 15mm ) MDF
Finish: Vinyl, real walnut and black painting
Dimensions with four rubber feed: 14" ( H ) x 8.6" ( W ) x 11.2" ( D )
Weight: 28.2 lbs