Silver 1.15 meter Tonearm / Phono Cable

Silver 1.15 meter Tonearm / Phono Cable

$450.00
          (0 reviews)
Out of stock
+
  Add to Wishlist
Vertere Cables unleash a life-like musical performance from your hi-fi. Sit back, relax, and feel the impact of real musicians in the comfort of your home. Free shipping to Continental US only!

Vertere Acoustics's Philosophy 

“Our Philosophy – Any cable can only degrade the signal. The best cable is the one that degrades the signal least.”

Key to this is preserving all the dynamics, harmonic structure and detail of the music, throughout the system. All too often, it is the connecting cables that corrupt the delicate audio signal. Vertere has fundamentally addressed this issue with its unique conductor design and internal cable architecture.

HB Hand-built Reference Analogue Tonearm Cable

Unsurpassed for integrity of signal transmission from cartridge to phono stage, Pulse-HB Hand-built Analogue Tonearm Cable is Vertere’s absolute reference.

Pulse-HB Hand-built Analogue Tonearm Cable is internally configured to suit the miniature phono cartridge generator. This construction conducts the delicate phono signal as well as accommodating the substantial RIAA equalization on the LP. This ensures that low frequencies, recorded at much attenuated levels, are just as optimally and accurately conducted relative to the much higher level high frequencies.

HBintRCA01aww.jpg

 

veRum Solo Tonearm Cable

The new veRum Solo reference-standard Analogue Tonearm and Interconnect Cable offers superlative performance and is closest in design and sonic attainment to Vertere’s benchmark Pulse-HB.

Manufactured on precision machines with the most delicate tolerance cable manufacturing machinery in Europe. veRum brings a large proportion of the reference Pulse HB's neutrality, dynamics and even-handed performance without the high costs involved in being hugely labour intensive and using wire so delicate that four together are thinner than a human hair. 

veRum Solo includes two VeRum cables and a separate Special Ground/Power Conductor set. The extra set includes two tinned high-purity copper conductors with a PVC dielectric, shielded by a special foil and tinned copper braid, all enclosed in a PVC outer. Surrounding all three PVC enclosed wires is a cotton filler for damping and a final PVC outer jacket for protection.

Each veRum cable ( one channel ) Includes:

- Two signal and two return Pulse Hairline silver-plated high-purity copper multi-stranded wires with an FEP dielectric 

- One signal and one return Microline silver-plated high-purity copper multi-stranded wires insulated with an FEP dielectric  

- One signal and one return Modeline silver-plated high-purity copper multi-stranded wires with an FEP dielectric 

Vertere VeRum Solo DIN to RCA Tonearm.jpg

 

Redline Analogue Tonearm Cable

High-performance Redline Analogue Tonearm Cable follows the design principles of Vertere’s superior Pulse-R, preserving the essence of the analogue signal.

Redline Analogue Tonearm Cable, as with the Pulse-R, allows the miniature cartridge generator to drive the phono input comfortably. The internal conductor configuration of the Redline tonearm cable is optimized for conducting the delicate phono signal with its substantial RIAA equalization.

This provides the low frequencies, recorded at attenuated levels, and the much higher-level high frequencies, with an equal ‘drive’. Thus elevating the performance achieved with the Redline tonearm cable as close as possible to the formidable Pulse-R.

vertere-redline-tonearm-cable2.jpg

Technical Specifications

Type: Tonearm cable

Cable Type: 7 x Conductors Vertere Pulse Multi Type, 3 x Ground, 2 x Signal ( Hot ), 2 x Signal ( Return )

Conductor: High Purity Copper

Plating: Silver, Tin

Insulation: FEP, Special PVC

Shield: Main Braid + Inner Special Wrap

Size: 4.8 mm x 10 mm

Termination & Length:  Vertere Redline 5pin 90°, RCA, XLR with Ground Wire 1.15m ( Additional lengths in 0.5 meter steps )

D-Fi Tonearm Cable

Get true high-end performance at entry level. Pulse D-Fi Analogue Tonearm Cable partners any tonearm with a 5-pin connector to provide optimum results from the phono cartridge.

The ‘balanced’ nature of the D-Fi cable coupled with its superb shielding characteristics ensures optimum results from any phono cartridge. Complement your vinyl setup with Pulse D-Fi Analogue Tonearm Cable and enjoy listening to your records like never before.

D-Fi tone arm cable is available with Vertere proprietary RCA or balanced XLR connectors.

Technical Specifications

Type: Tonearm Cable

Termination and Length: 5 Pin, 5pin 90°, RCA, XLR 

Cable Type: x 5 Conductors, Pulse Multi Type

Conductor: High Purity Copper

Plating: Silver, Tin

Insulation:  PTFE, PVC

Shield: Main Braid + Inner Wrap

Connector: D-Fi with x3 Thickness Gold Plated Contacts

Size: 3.5 mm x 8.0 mm