Not yet rated Add your review
The amp uses SRPP circuitry for all stages to achieve the highest sound quality possible. Free Shipping to the continental US only !
The CL-38uC uses SRPP ( Shunt Regulated Push Pull ) circuitry for all stages to achieve the highest sound quality possible.A genuine phono equalizer is included, the MC-low and MC-high impedance ( gain ) inputs each have independent MC transformers and are selectable using the MC impedance lever switch.Tone controls enable the listener to fine tune the sound quality.Refined exterior design and newly added balanced inputs make this vacuum tube control amp a new standard for its generation.
Since the launch of our SQ-5A vacuum tube integrated amplifier in 1961, we have continued making vacuum tube amps without a break. We have produced many models that are highly valued as signature models and satisfied music lovers are enjoying them to this day, even several decades after their release. The CL-38uC & MQ-88uC combine Luxman’s history of producing fine vacuum tube products and the traditional wisdom and skills gained along the way.
Due to their relatively simple circuitry, vacuum tube amplifiers are greatly affected by the quality of individual components, hence we utilize Luxman’s own high-quality transformers and blocking capacitors. Further customization comes in the form of Nichicon made, high voltage, metalized polypropylene film coupling capacitors, which have been introduced for their supple, natural tone. Improved audio quality has been realized by shortening the internal wiring.
The CL-38uC control amplifier and the MQ-88uC power amplifier are based on the latest technology and design, but the exterior styling evokes a classic image from the heyday of vacuum tube audio products. The CL-38uC is modeled on the CL-35, released in 1970, & the MQ-88uC is modeled on the MQ-60, released in 1969. A classic front panel design should be functional, but also beautiful, achieved by careful selection of knobs & lever switches. Listeners can appreciate such traditional design features, with their nostalgic flavor, whilst enjoying these contemporary, high-performance audio products.
Each CL-38uC control amplifier and MQ-88uC power amplifier undergoes a final performance check after a 48 hour aging process following assembly. We have selected JJ Electronic ( Slovakia ) vacuum tubes for these models as they are renowned for their reliability, long life & the ease with which they operate at vacuum tube amplifier voltages & heat dissipation conditions.
We have retained the outer wooden case, as it represents the tradition of the 38 series. The chassis has been expanded to a width of 440 mm which is the standard size for current Luxman products. The internal chassis acts as an omnidirectional shielded metal enclosure. In order to prevent magnetic flux leakage and eliminate noise, the toroidal power transformer and choke transformer have integral shielded cases.
The CL-38uC’s SRPP circuitry, used for the phono equalizer section, tone control section and amp section, ensures a flat frequency response and has other advantages, such as a low output impedance ( 300 ohm ), low distortion and extended vacuum tube life. The elegant construction of such a control amplifier in a dedicated enclosure allows us ample space to mount a full complement of vacuum tubes inside, realizing clear and accurate musical expression and enviable sound quality which we feel will attract many music lovers and enthusiasts.
New features, balanced inputs and various controls
The CL-38uC’s balanced input terminals have dedicated transformers, improving integration with other high-end equipment. The built-in phono equalizer circuit is compatible with MM and MC cartridges and is equipped with step-up transformers for MC cartridges an independent left & right two step gain selector. The three-position switchable crossover frequencies for bass and treble tone controls enable the listener to fine tune the signal to the desired tonal character.
|Input sensitivity/input impedance||Phono ( MM ): 2.0 mV / 47k Ω
Phono ( MC high ): 0.3 mV / 100 Ω
Phono ( MC low ): 0.08 mV / 30 Ω
Line: 190 mV / 50k Ω
Balanced Line: 190 mV / 20k Ω *2
|Output/output impedance||Rated 1 Volt / 300 Ω|
|Frequency response||Phono: 20 Hz to 20k Hz ( ± 0.5 dB )
Line / Balanced Line: 10 Hz to 70k Hz ( within -3.0 dB )
|Total harmonic distortion||0.006% or less ( 1k Hz )
0.06% or less ( 20 Hz to 20k Hz )
|S/N ratio (IHF-A)||Phono ( MM ): 68 dB or more
Phono ( MC high ): 63 dB or more
Phono ( MC low ): 60 dB or more
Line/Balanced line: 100 dB or more
|Tone control||± 8 dB, selectable frequency range
Bass: 150 / 300 / 600 Hz,
Treble: 1.5k / 3k / 6k Hz
|Low cut||30 Hz ( - 6 dB / octave )|
|Vacuum tubes||ECC 83S × 3, ECC 82 × 5|
|Power supply||230 Volt ~ ( 50 Hz ) / 115 Volt ~ ( 60 Hz )|
|Power consumption||35 watt|
|External dimensions||440 ( W ) x 169 ( H ) x 307 ( D ) mm
19 mm front panel knob of & 12 mm rear panel terminals are included in the depth measurement
|Net weight||13.3 kg ( main unit )|
|Accessories||Remote control ( RA-19 ) & Power cable|
*2 This unit uses transformer equipped balanced inputs. Since the maximum input level at the balanced inputs is equivalent to 2.5 Volts, please be aware that the audio signal may be distorted if you connect a device with a higher output level ( higher output voltage ). There is no problem when using Luxman products ( CD players etc. ). For details, please refer to the instruction manual for the equipment to be used.
Shipping dimensions & weight: 23" x 17" x 13", 39 lbs
Are you an audiophile on a budget? If you check out via PayPal, you have the option offered at PayPal checkout! ( Free to sign-up & free account ).
Or contact us to inquire how you can finance your purchase through our partner, ( Synchrony ).