Free Shipping to Continental US only !

Trio11 Be Active 3-Way Studio Monitor Each ( Red )

Trio11 Be Active 3-Way Studio Monitor Each ( Red )

          (0 reviews)
Out of stock
  Add to Wishlist
Drawing on the popularity and superiority of the earlier entries in the Trio line, Focal's Trio11 Be monitors are some of the most advanced nearfield/midfield monitors available. Free Shipping to Continental US only!

The Loudspeaker Dedicated to Nearfield & Midfield

As well as new speaker drivers ( a 5” midrange and a 10” subwoofer ) with high efficiency and power handling, the Trio11 Be monitor enjoys all of Focal's very latest technologies when it comes to acoustics and electronics: TMD and NIC technologies; optimized vents that promote dynamic control and perfect bass definition; high excursion, enabling even more linearity of the subwoofer... 

Thanks to its class G amplification, Trio11 Be delivers a high SPL ( 118dB at 1m ) and offers a great versatility of use and installation configurations in near-field and midfield applications. A key asset, always coming along with an extremely precise sound reproduction and stereo image.

With an extended bandwidth ( 30 Hz-40 kHz ), this loudspeaker is also composed of a 3-way monitor and a 2-way monitor, just like Trio6 Be, which lets you check the mix transfer sound quality thanks to FOCUS mode.

Dynamics, Neutrality, & Precision

A Focal signature, the Pure Beryllium inverted dome tweeter offers a perfectly linear frequency response and a detailed reproduction of the treble. Its exclusive profile guarantees optimum energy transfer from the coil to the dome making a high efficiency tweeter (capable of covering 5 octaves from 1,000 to 40,000 Hz) while providing wide sound dispersion.

The 10” subwoofer's 'W'-profile cone enables a true optimization of the frequency response thanks to a precise control of the rigidity, lightness and damping. The balance between these three fundamental parameters is the basis of the monitor's incredible sound neutrality.

Adjustable Plate

The aluminium plate incorporating the tweeter and woofer is adjustable through 360°, in 90° increments, so the Trio11 Be can be used either vertically or horizontally.

This function makes it possible to optimize the monitor's performance based on its positioning in the room and the latter's acoustics.

Meticulous Finishes

The cabinet, developed and manufactured by Focal in its cabinetry workshop in Bourbon-Lancy in France, consists of two side panels and a body in MDF measuring between 13/16” (21mm) and 13/16” (30mm) thick: an indicator of the quality of each material chosen, combined with careful attention to the finishes.

Trio11 Be has two side panels in a natural dark red burr ash veneer and a black central body, for an aesthetic rendering that is also discreet and hard-wearing.

2 Monitors in 1

Trio11 Be combines two monitors in a single enclosure.

The 3-way monitor provides a flawless control of the entire audio spectrum (30 Hz – 40 kHz).

The 2-way monitor, with a frequency response of 90 Hz to 20 kHz, makes it possible to check the transfer quality of mixes on systems with a limited frequency response in the bass (televisions, computers, cars, etc.).

Key Points

- High SPL: 118 dB @ 393/8'' (1m).

- FOCUS Mode: two monitors in one with remote switchover.

- Pure Beryllium inverted dome tweeter:very low directivity, linearity, dynamics.

- 'W' composite sandwich cone on woofer and subwoofer: neutral sound, no distortion.

- Bass, mid-bass and treble settings on rear panel: optimum acoustical integration.

- Optimized decoupling of the midrange speaker driver thanks to silent blocks.

- Ultra-low distortion and noise.



Frequency Response:

3-way mode: 30Hz - 40kHz (+/- 3dB)

2-way mode (Focus) 90Hz - 20kHz (+/- 3dB)

Maximum SPL:

3-way mode 118dB (peak @ 1m)

2-way mode (Focus) 105dB (peak @ 1m)



Type/Impedance: Electronically balanced / 10KOhms

Connectors: XLR

Sensitivity: Adaptable, +4 dBu or -10 dBv

Bass: 300W, class G

Midrange: 150W, class G

Treble: 100W, class AB

Power Supply

Local Supply: 230V (1.6A T fuse) - 115V (3.5A T fuse)

Wiring: Connection Detachable IEC inlet power cord

Indicators & Controls

Rear Panel:

Input Sensitivity Selector: (+4dBu/-10dBV)

Low Frequency Shelving: (+/- 3dB from 35 to 250Hz)

High Frequency Shelving: (+/- 3dB from 4.5 to 40kHz)

Low-Mid EQ Frequencies: (+/- 3dB to 160Hz, Q factor = 1)

FOCUS Input / FOCUS Output

Auto Standby: Auto standby switch on the back of the loudspeaker: enable / disable switch

LED: Focus power on, clipping and default LED on front panel




Focal 913/16" (25cm) speaker driver with ‘W’ composite sandwich cone



Focal 51/8" (13cm) speaker driver with ‘W’ composite sandwich cone



Focal 1" pure Beryllium inverted dome tweeter


Construction: 13/16 and 13/16" (21mm and 30mm) panels with internal braces

Finish: Natural veneering side panels Dark red burr ash, black body

Dimensions: ( with four rubber feet )  25" ( H ) x 139/16" ( D ) x 173/4" ( W )

Weight: 82.2 lbs

Focal Trio11 Be User's Manual

Focal Trio11 be Specification Sheet